AT500

Hydralube® AT-500 is a high performance silicone lubricant formulated specifically for use with compressed air-assisted cable blowing, jetting and pushing systems. These systems inject a high volume of air into the conduit which will rapidly dry out conventional cable placement lubricants (including silicone-based) and cause surface stickiness. Futhermore, the initial temperature of the compressed air can be very high, which will accelerate drying of the lubricant. Hydralube® AT-500 deposits a special low friction silicone coating on the conduit wall surface that is resistant to the drying effects of the rapid air movement and high heat. This product is fully compatible with cable jackets and HDPE or PVC conduit systems.

Features

  • Silicone lubricant specially formulated for all air-assisted cable placement applications
  • Resistant to the drying effects of high volume air movement
  • Designed to leave a minute yet highly effective layer of silicone on the interior of the conduit
  • Superior friction reduction properties with no “viscous drag” effects on cable
  • Compatible with all types of cable and conduit
Ask your question

Technical Specifications

Part # Description Packaging Weight/Package (lb) Quantity/Pallet Total Pallet Weight (lb)
20000008 HydraLube AT-500 Summer (12) 1 Quart (12) 1 Quart 27 lb 30 840 lb
20000009 HydraLube AT-500 Winter (12) 1 Quart (12) 1 Quart 27 lb 30 840 lb
20000129 HydraLube AT-500 Summer (4) 1 Gallon (4) 1 Gallon 37 lb 30 1140 lb
20000007 HydraLube AT-500 Summer 5 Gallon Pail 5 Gallon Pail 48 lb 18 894 lb
20000146 HydraLube AT-500 Winter 5 Gallon Pail 5 Gallon Pail 48 lb 18 894 lb
20000006 HydraLube AT-500 Summer 55 Gallon Pail 55 Gallon Pail 491 lb 4 1994 lb
20000151 HydraLube AT-500 Winter 55 Gallon Pail 55 Gallon Pail 491 lb 4 1994 lb
20000335 HydraLube AT-500 Summer 270 Gallon Tote 270 Gallon Tote 2365 lb

Other Lubricants

F150i

HydraLube® F-150i incorporates new lubricant technology to create a high performance, water-based pourable lubricant formulated for many difficult applications, including extremely long pulls with multiple bends. It is designed to meet or exceed all cable pulling requirements with respect to viscosity, cling, drag, wetting, operational temperature range and reduction of pulling tension. Lubricant application systems are available. UL Listed.

F100i

HydraLube F-100i incorporates new lubricant technology to create a high performance, water-based pourable lubricant formulated for many applications, such as fiber optic, coaxial, 600 V and higher voltage-rated cables. It is designed to meet or exceed all cable pulling requirements with respect to viscosity, cling, drag, wetting, operational temperature range and reduction of pulling tension. Lubricant application systems are available. UL Listed.

Lubaduk

LUBADUK® keeps pull tensions low; up to 74% less friction and 50% less pulling tension than with other lubricants. The effectiveness of LUBADUK® has been proven in the field and with extensive testing. Reduced cable tension (as much as 50%) greatly reduces the wear on cable pulling equipment and improves safety. A unique shear-sensitive carrying agent holds a dispersion of silicone oil and microspheres in suspension. LUBADUK® microspheres are tiny ball bearings, with diameters between 0.010” and 0.020.” Pulling cable with LUBADUK® means cable actually rolls on a layer of microspheres, which keep friction between cable and conduit extremely low. Any change in the cable contact point provides a fresh layer of microspheres, keeping friction low.

F300i

Hydralube® F-300i is a polymer-based, water soluble lubricant specifically formulated for placement of wire and cable for electric and telecommunications applications. The pourable gel consistency of Hydralube® F-300i allows for easy application in underground horizontal pulls, whether by pouring directly into the cable feeder tube or applying by pump, thus avoiding the mess of hand application. Hydralube F-300i is designed to meet or exceed all cable pulling requirements with respect to viscosity drag, wetting, operation temperature range, and reduction of pulling friction.

F200i

HydraLube® F-200i incorporates new lubricant technology to create a high performance, water-based gel lubricant formulated for many difficult applications, such as 600 V and higher voltage-rated cables. F200i is designed to meet or exceed all cable pulling requirements with respect to viscosity, cling, drag, wetting, operational temperature range and reduction of pulling tension. Lubricant application systems are available. UL Listed.
Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us

Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us