E-LOC

A low-cost push-on coupler with a molded rubber gripping insert. Can be used on HDPE, PVC, Fiberglass (FRE), and metal conduit. Transition couplers are used to join ducts with different outside diameters.
A low-cost push-on coupler with a molded rubber gripping insert. Can be used on HDPE, PVC, Fiberglass (FRE), and metal conduit. Transition couplers are used to join ducts with different outside diameters.

Features

  • Fast push-on installation
  • Inexpensive, one person installation
  • Low pull out strength
  • Not recommended for blowing or plow chute applications
Ask your question
E-LOC

Technical Specifications

Select Coupler Type

Classic
Corrugated
Transition
Part # Description Nominal OD (in.) OD Working Range (in) Height (in) Packaging
20001509 0.50" SDR E-LOC Coupler 0.84 0.836 - 0.844 6 Each
20001948 0.75" SDR E-LOC Coupler 1.05 1.045 - 1.055 6 Each
20001510 1.00" SDR E-LOC Coupler 1.315 1.308 - 1.322 6 Each
20001511 1.25" SDR E-LOC Coupler 1.66 1.652 - 1.668 6 Each
20001512 1.50" SDR E-LOC Coupler 1.9 1.890 - 1.910 6 Each
20001513 2.00" SDR E-LOC Coupler 2.375 2.363 - 2.387 6 Each
20001514 2.50" SDR E-LOC Coupler 2.875 2.861 - 2.889 6 Each
20001502 3.00" SDR E-LOC Coupler 3.5 3.482 - 3.518 6 Each
20001014 4.00" SDR E-LOC 6" Length 4.5 4.477 - 4.523 6 Each
20003131 4.00" SDR E-LOC 12" Length 4.5 4.477 - 4.523 12 Each
20002844 4.00" SDR E-LOC 8" Length 4.5 4.477 - 4.523 8 Each
20003506 4.00" SIDR E-LOC Coupler 4.76 4.760 6 Each
20002812 5.00" SDR E-LOC Coupler 5.563 5.535 - 5.591 6 Each
20005179 6.00" SDR E-LOC 12" Length 6.625 6.592 - 6.658 12 Each
20001503 6.00" SDR E-LOC 6" Length 6.625 6.592 - 6.658 6 Each
20003134 6.00" SDR E-LOC 8" Length 6.625 6.592 - 6.658 8 Each
20003118 8.00" SDR E-LOC Coupler 8.625 8.582 - 8.668 8 Each
20001504 1.00" E-LOC Corrugated Coupler 1.35 1.350 6 Each
20003132 1.25" E-LOC Corrugated Coupler 1.575 1.575 6 Each
20002811 1.50" E-LOC Corrugated Coupler 1.83 1.830 6 Each
20003209 2.00" E-LOC Corrugated Coupler 2.35 2.350 6 Each
20005345 1.00" - 1.25" SDR Transition E-LOC Coupler 1.315 - 1.660 6 Each
20001501 1.25" - 2.00" SDR Transition E-LOC Coupler 1.660 - 2.375 6 Each
20001842 1.50" - 2.00" SDR Transition E-LOC Coupler 1.900 - 2.375 6 Each
20001942 2.00" - 3.00" SDR Transition E-LOC Coupler 2.375 - 3.500 6 Each
20003710 3.00" - 4.00" SDR Transition E-LOC Coupler 3.500 - 4.500 6 Each

Downloads

Specifications
DL_ELOC Coupler 4.2021

Other couplers

Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16" nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1" - 3" sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.

Shur-Lock II

Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16" nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1" - 3" sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.
Installation is fast and easy; no heat or tools are needed. Simply push the duct ends into the coupler for a locked and air-sealed assembly. The compact profile of the Push-Lock is well suited for use in pull boxes, vaults, or other limited-access areas such as narrow trenches. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties. The Push-Lock is non-transparent and contains UV inhibitors, but is not recommend for aerial applications.

Push-Lock

Installation is fast and easy; no heat or tools are needed. Simply push the duct ends into the coupler for a locked and air-sealed assembly. The compact profile of the Push-Lock is well suited for use in pull boxes, vaults, or other limited-access areas such as narrow trenches. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties. The Push-Lock is non-transparent and contains UV inhibitors, but is not recommend for aerial applications.
The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.

Split-Lock +

The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.
Reverse-threaded aluminum coupler. Tapered threads accommodate a wide range of conduit OD's within a given conduit size. Also available in a Riser/Plenum rated version.

Aluminum Threaded

Reverse-threaded aluminum coupler. Tapered threads accommodate a wide range of conduit OD's within a given conduit size. Also available in a Riser/Plenum rated version.
A simple coupler to install and ideal where higher pull out strengths are needed. The molded rubber gripping insert creates a water-tight and air-tight seal, while the additional screws aid to increase the pull out strength.

E-LOC Plus

A simple coupler to install and ideal where higher pull out strengths are needed. The molded rubber gripping insert creates a water-tight and air-tight seal, while the additional screws aid to increase the pull out strength.
The Double E-LOC versions are suitable for cable blowing applications and are UV resistant for aerial use.

Double E-LOC

The Double E-LOC versions are suitable for cable blowing applications and are UV resistant for aerial use.
The Mor Clamp coupling is quickly and easily installed by slipping onto or wrapping around a conduit joint. The thick neoprene gasket assures a positive butt joint seal. It accommodates a variety of conduit types including HDPE, cast iron, PVC, and fiberglass. The stainless steel design offers a lightweight and economical unit which is strong and durable. Zinc plated carbon steel bolts are included for tightening the Mor Clamp coupling.

Mor Clamp

The Mor Clamp coupling is quickly and easily installed by slipping onto or wrapping around a conduit joint. The thick neoprene gasket assures a positive butt joint seal. It accommodates a variety of conduit types including HDPE, cast iron, PVC, and fiberglass. The stainless steel design offers a lightweight and economical unit which is strong and durable. Zinc plated carbon steel bolts are included for tightening the Mor Clamp coupling.
Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull out resistance.

Compression Coupler

Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull out resistance.
Quick, field assembly couplers or adapters to join different material types

Smooth-Cor Flex Kit

Quick, field assembly couplers or adapters to join different material types
Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.

Clear-Lock

Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.
The latest in Dura-Line's coupler collection, the Redi-Lock™ is ideal for joining lengths of HDPE Sticks but can also be used with continuous length, reeled products.

Redi-Lock

The latest in Dura-Line's coupler collection, the Redi-Lock™ is ideal for joining lengths of HDPE Sticks but can also be used with continuous length, reeled products.
The Clear-Lock Couplers and PinPoint Splices in one simple package. All the advantages of the Clear-Lock couplers with water-tight connectors for the PinPoint locatable duct in one simple kit. A 2.50" kit is also available with our new Redi-Lock coupler.

PinPoint Splice Kit

The Clear-Lock Couplers and PinPoint Splices in one simple package. All the advantages of the Clear-Lock couplers with water-tight connectors for the PinPoint locatable duct in one simple kit. A 2.50" kit is also available with our new Redi-Lock coupler.
Used with Armor Guard Conduit, the Armor Guard Kit is comprised of a Split-Lock + Coupler, a ScotchLok shield connector, and bonding braid for bonding and grounding the armored layer in the duct. This coupler arrangement is suitable for cable blowing applications.

Armor Guard Kit

Used with Armor Guard Conduit, the Armor Guard Kit is comprised of a Split-Lock + Coupler, a ScotchLok shield connector, and bonding braid for bonding and grounding the armored layer in the duct. This coupler arrangement is suitable for cable blowing applications.
Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us

Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us